background image

3.5   

TerraE is not liable for any force majeure (ex. Lightening, storm, flood, fire, earthquake, etc)

3.6   

In order to standardize the use of sample batteries, the rights, obligations and responsibilities of every customer and 

TerraE are clarified. Before using the battery, please read carefully and thoroughly understand the contents of the specifica-
tion. In order to ensure the safety of the battery, please contact TerraE to discuss design of the application. Also, if there are 
special usage conditions (for example: a large current load, a quick charge method, or a special usage pattern), please consult 
TerraE before finalizing the product specification. 

If you choose to use this battery, your use will be regarded as an endorsement of all the contents of this statement. 

The amendment, renewal and final interpretation of this statement are belong to TerraE.

12

INR 18650 35 E

Handling Instructions

TerraE Confidential Proprietary and not be reproduced without written permission from BMZ Germany GmbH, Zeche Gustav 1, 63791 Karlstein

3. EXCLUSION LIABILITY

3.1   

TerraE is not liable for any loss caused by breach of notice in the specification

3.2   

TerraE is not responsible for any problems caused by design defects in battery packs, electric cars and chargers

3.3   

TerraE does not accept abnormal batteries caused by improper assembly

3.4   

TerraE is not liable for any loss caused by incorrect or incongruent with the SPEC charge and discharge method and 

inappropriate environment

2.3   PRECAUTIONS 

2.3.1 

Don’t use or place batteries in high temperature environments, such as in direct sunlight. The battery may catch 

fire, smoke, explode or cause heat. At the same time, may cause battery performance and life degradation.

2.3.2 

Battery pack has a protective line. Do not use batteries in places where static electricity (over 100V) is generated, 

which may damage the protection circuit. If the protective line of the battery is damaged, the battery may catch fire, 
smoke, explode or cause heat. Do not use Lithium ion cell with the primary batteries or secondary batteries whose ca-
pacity or kinds or maker is different. If do that, the cell will be discharged or charged excessively in use. And it may cause 
the generating heat, smoke, rupture or flame because of the abnormal chemical reaction in cells.

2.3.3 

Specified the charging temperature range. Do not charge the battery outside the specified temperature range. 

Failure to do so may result in heat, leakage, or serious damage. In addition, battery performance and life degradation 
may occur.

2.3.4 

Please read the manual before use. Please keep this manual for future reference. 

2.3.5 

Please read the charging method of the charger manual. 

2.3.6 

In the first use, if the battery has an abnormal smell, heat or rust, please contact the supplier. 

2.3.7 

Keep away from flammable materials during charging and discharging. May cause fire, smoke, explode or cause 

heat. 

2.3.8 

If the electrolyte leaks from the battery, gets on the clothes or on the skin, rinse it immediately with water. Other-

wise it may irritate the skin. 

2.3.9 

If wires or metal objects come out of the battery, completely seal and insulate them. Otherwise, the battery may 

cause a short circuit, fire, smoke, explosion, or cause heat. 

2.3.10 

After use, please carry out battery recycling according to local laws and regulations. 

Summary of Contents for TerraE INR 18650 35 E














Reviews: