manualshive.com logo in svg

BMW Z4 2014, Owner'S Manual

The BMW Z4 2014 Owner's Manual is an essential guide for owners of this iconic sports car. With detailed instructions on maintenance, troubleshooting, and important safety information, this manual is a must-have. Download it for free from manualshive.com and keep it handy to ensure a seamless driving experience.

Share
Download
background image

1

2

Cause

How to respond

The gears that can be selected are re‐
stricted.

After switching off the engine,
transmission position P is en‐
gaged automatically. It may not
be possible to continue driving.

Transmission limp-home program active
with restricted range of gears, possibly with
reduced acceleration.

You can continue your journey,
but moderate your speed and ex‐
ercise due caution. Have the sys‐
tem checked immediately.

Gears can be engaged without depressing
the brake.

Always depress the brake to en‐
gage a gear.

Lights up in red:

The transmission is overheating.

Stop the car and engage trans‐
mission position P. Allow the
transmission to cool down. You
can continue your trip at moder‐
ate speeds. Have the system
checked if the situation reoccurs.

Lights up in yellow:

Manual transmission: the clutch tempera‐
ture is too high.

Allow the clutch to cool down.
Cooling occurs while the vehicle
is either stationary or moving.
Avoid stop-and-go driving and
driving below walking speed for
lengthy periods. The clutch has
cooled down when this message
disappears. The clutch is not
damaged.

The automatic transmission is too hot.

Avoid high engine loads. You can
continue your journey, but mod‐
erate your speed and exercise
due caution.

Transmission position P is not engaged.
The vehicle is not secured against rolling.

The selector lever is malfunctioning.

The trip can be continued. Shift
again if necessary. Have the sys‐
tem checked if the situation re‐
occurs.

Seite 199

Indicator/warning lamps

Mobility

199

Online Edition for Part no. 01 40 2 957 378 - X/14

Summary of Contents for Z4 2014





























































































































































































































Reviews:

No comments

Related manuals for Z4 2014

ZAPTEC Go Instruction Manual preview
Go
Brand: ZAPTEC Pages: 240
Dakota Digital VHX-37F Installation preview
VHX-37F
Brand: Dakota Digital Pages: 2
Dakota Digital BIM-01-2 Manual preview
BIM-01-2
Brand: Dakota Digital Pages: 7
Jeep Commander Overview Manual preview
Commander
Brand: Jeep Pages: 25
Jeep Commander Warranty Information Booklet preview
Commander
Brand: Jeep Pages: 51
Farenheit CCD-5XS Owner'S Manual preview
CCD-5XS
Brand: Farenheit Pages: 8
Ford E-Transit 2022 Manual preview
E-Transit 2022
Brand: Ford Pages: 22
BESAFE iZi Flex Manual preview
iZi Flex
Brand: BESAFE Pages: 4
Fiat 500 L 2019 User Manual preview
500 L 2019
Brand: Fiat Pages: 172
Honda HondaLink Quick Start Manual preview
HondaLink
Brand: Honda Pages: 6
tams elektronik 54-01016 Manual preview
54-01016
Brand: tams elektronik Pages: 44
Velleman CARS4500 User Manual preview
CARS4500
Brand: Velleman Pages: 12
Hudson 1933 Eight Owner'S Manual preview
1933 Eight
Brand: Hudson Pages: 34
iArmor EDGE IA-W208 Manual preview
EDGE IA-W208
Brand: iArmor Pages: 6
ICON 91824E Installation Instructions preview
91824E
Brand: ICON Pages: 4
Huf HUF8432MS Technical Description And User Manual preview
HUF8432MS
Brand: Huf Pages: 6
Mobileye C2-270 User Manual preview
C2-270
Brand: Mobileye Pages: 29
GROM Audio VLINE Installation Manual preview
VLINE
Brand: GROM Audio Pages: 20

Brands by name

Popular brands

Load more brands