manualshive.com logo in svg

BMW X6 M50i 2021, Owner'S Manual

The BMW X6 M50i 2021 Owner's Manual is a comprehensive guide that ensures you get the most out of your luxury SUV experience. This invaluable manual is available for free download at manualshive.com, providing you with detailed instructions and insights to unlock the full potential of your vehicle.

Share
Download
background image

Detection range

The system's detection capability is limited.
Only objects that are detected by the system are
taken into account.

Thus, a system reaction might not come or
might come late.
The following situations may not be detected, for
instance:

▷

Slow moving vehicles when you approach
them at high speed.

▷

Vehicles that suddenly swerve in front of you,
or strongly decelerating vehicles.

▷

Vehicles with an unusual rear view.

▷

Two-wheeled vehicles ahead of you.

Upper speed limit

If the vehicle speed exceeds approx.
155 mph/250 km/h, the system is deactivated
temporarily. When the vehicle slows down to be‐
low this speed, the system is reactivated.

System limits of the sensors

Additional information:

▷

Cameras, refer to page 

37

.

▷

Radar sensors, refer to page 

38

.

Functional limitations

The system may be limited in the following situa‐
tions:

▷

In tight curves.

▷

If the driving stability control systems are lim‐
ited or deactivated, for instance DSC OFF.

▷

Up to 10 seconds after the start of the engine
via the Start/Stop button.

Warning sensitivity

The more sensitive the warning settings are, for
example the warning time, the more warnings are
displayed. Therefore, there may also be an ex‐
cess of premature or unjustified warnings and re‐
actions.

Evasion Assistant

Principle

The Evasion Assistant supports the driver in
making evasive maneuvers in certain situations,
such as when obstacles or persons suddenly ap‐
pear.

General information

The system issues a warning and intervenes to
support the driver if a lateral evasive maneuver is
possible. Sensors monitor and detect the clear‐
ance around the vehicle. If the system identifies
space alongside the vehicle, it supports an eva‐
sive maneuver begun by the driver by safely pro‐
viding targeted supporting steering movements.

Safety information

Warning

The system cannot serve as a substitute for the
driver’s personal judgment in assessing visibility
and traffic situation. There is a risk of accident.
Adjust driving style to traffic conditions. Watch
traffic closely and actively intervene where ap‐
propriate.

Seite 187

Safety

CONTROLS

187

Online Edition for Part no. 01405A38F56 - VI/21

Summary of Contents for X6 M50i 2021

















































































































































































































































































































































































































Reviews:

No comments

Related manuals for X6 M50i 2021

Jeep Liberty Quick Reference Manual preview
Liberty
Brand: Jeep Pages: 6
Raven CR7 Calibration Manual preview
CR7
Brand: Raven Pages: 24
Weather Guard 237 Assembly And Installation Instructions preview
237
Brand: Weather Guard Pages: 4
Gardigo MARTEN-FREE CAR Instruction Manual preview
MARTEN-FREE CAR
Brand: Gardigo Pages: 36
Jacob Jensen Electronic Parking Disc 3 Quick Manual preview
Electronic Parking Disc 3
Brand: Jacob Jensen Pages: 2
Yakima K1005 Instructions Manual preview
K1005
Brand: Yakima Pages: 12
Metra Electronics 99-3030B Installation Instructions Manual preview
99-3030B
Brand: Metra Electronics Pages: 12
Halfords Exodus 360 Fitting Instructions preview
Exodus 360
Brand: Halfords Pages: 4
BMW Wireless Charging Station Universal Instructions For Use Manual preview
Wireless Charging Station Universal
Brand: BMW Pages: 160
T-Mobile SyncUP DRIVE Start Manual preview
SyncUP DRIVE
Brand: T-Mobile Pages: 2
C-KO RS-4-18-R-I Fitting Instructions preview
RS-4-18-R-I
Brand: C-KO Pages: 4
Sagem MyCK100 User Manual preview
MyCK100
Brand: Sagem Pages: 10
Aries 205039 Installation Manual preview
205039
Brand: Aries Pages: 5
Mercedes-Benz MY17 c-class Operator'S Manual preview
MY17 c-class
Brand: Mercedes-Benz Pages: 354
JSPORT JSRLP024 Installation Instructions preview
JSRLP024
Brand: JSPORT Pages: 2
Quadratec QuadraTop 11051.0415 Installation Manual preview
QuadraTop 11051.0415
Brand: Quadratec Pages: 8
Packard 1948 eight Operating Instructions Manual preview
1948 eight
Brand: Packard Pages: 25
TrailFX 2123131 Quick User Manual preview
2123131
Brand: TrailFX Pages: 2

Brands by name

Popular brands

Load more brands