BMW X6 M50i 2021 Owner'S Manual Download Page 38

Page: 38 / 400

Top view cameras

One camera is located at the bottom of each ex‐
terior mirror housing.

Rearview camera

The camera is located in the handle of the trunk
lid.

System limits of the cameras

The cameras may not be fully functional and may
provide incorrect information in the following sit‐
uations:

▷

In heavy fog, wet conditions, or snowfall.

▷

On steep hills, in steep depressions or in tight
curves.

▷

When the camera field of view is covered, for
instance by a fogged up windshield or labels.

▷

If the camera lens is dirty or damaged.

▷

With exterior mirrors folded in.

▷

When driving toward bright lights or strong
reflections, e.g., because of a setting sun.

▷

When it is dark outside.

▷

Camera behind the windshield: if the camera
has overheated and been temporarily
switched off due to excessively high temper‐
atures.

▷

Camera behind the windshield: during cali‐
bration of the camera immediately after vehi‐
cle delivery.

If applicable, a Check Control message will be
displayed when the system limits are reached.

Radar sensors

Front radar sensor

The radar sensor is located in the front bumper.

Radar sensors, side, front

The radar sensors are located in the bumper.

Seite 38

CONTROLS

Sensors of the vehicle

Online Edition for Part no. 01405A38F56 - VI/21

Summary of Contents for X6 M50i 2021

















































































































































































































































































































































































































Search results

Summary of Contents for X6 M50i 2021

Reviews:

Related manuals for X6 M50i 2021

Brands by name

Popular brands

BMW X6 M50i 2021, Owner'S Manual

Search results

Summary of Contents for X6 M50i 2021

Reviews:

Related manuals for X6 M50i 2021

Brands by name

Popular brands