BMW X5 xDrive45e PLUG-IN HYBRID 2022 Owner'S Manual Download Page 392

Page: 392 / 444

▷ Leaded gasoline.
▷ Metallic additives, for instance manga-

nese or iron.

Do not press the Start/Stop button after refu-

eling with the wrong fuel. Contact an author-

ized service center or another qualified serv-

ice center or repair shop.

NOTICE

Fuel that does not comply with the minimum

quality can compromise engine function or

cause engine damage. There is a risk of

damage to property, among other potential

damage. Do not fill with fuel that does not

comply with the minimum quality.

NOTICE

Incorrect fuels can damage the fuel system

and the engine. There is a risk of damage to

property, among other potential damage. Do

not use fuels with a higher ethanol content

than recommended. Do not refuel with fuels

containing methanol, e.g. M5 to M100.

Recommended gas quality

BMW recommends AKI 91.

Minimum fuel grade

BMW recommends AKI 87.
If you use gasoline with this minimum AKI Rat-

ing, the engine may produce knocking sounds

when starting at high external temperatures.

This has no effect on the engine life.

Engine oil

General information

The engine oil consumption is dependent on

your driving style and driving conditions.
Therefore, regularly check the engine oil level

after refueling by taking a detailed measure-

ment.
The engine oil consumption can increase in

the following situations, for instance:

▷

Sporty driving style.

▷

Break-in of the engine.

▷

Idle operation of the engine.

▷

With use of engine oil types that are classi-

fied as not suitable.

Different Check Control messages appear on

the Control Display depending on the engine

oil level.
The vehicle manufacturer recommends that

you have an authorized service center or an-

other qualified service center or repair shop

change the engine oil.

Safety information

NOTICE

An engine oil level that is too low causes

engine damage. There is a risk of damage

to property, among other potential damage.

Immediately add engine oil.

Seite 392

MOBILITY

Operating materials

392

Online Edition for Part no. 01405A604A9 - VI/22

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022





























































































































































































































































































































































































































































Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands

BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands