BMW X5 xDrive45e PLUG-IN HYBRID 2022 Owner'S Manual Download Page 355

Page: 355 / 444

With a discharged vehicle battery, no operation

of the vehicle is possible.

Put the vehicle into operation

If the vehicle battery is discharged, the com-

bustion engine can be started using the bat-

tery of another vehicle and two jumper cables.
Additional information:
Jump-starting, refer to page

409

Service life of high-voltage

battery

General information

The performance of the high-voltage battery

decreases over its service life. The service life

of the high-voltage battery can be optimized

by how it is used.

Long stationary periods

Keeping the vehicle stationary for longer peri-

ods can reduce the charge state of the high-

voltage battery.
To optimize the service life of the high-voltage

battery, note the following:

▷

Do not park the vehicle for longer than

14 days if the electric range is exhausted.

Taking out of service

For information on taking the battery out of

service and maintenance and repair of the bat-

tery, please consult the New Vehicle Limited

Warranty Booklet and the Maintenance Book.

The Maintenance Book is available online and

accessible via a QR code in the New Vehicle

Limited Warranty Booklet.

Maintenance

The high-voltage battery is maintenance-free.

Seite 355

Charging the vehicle

MOBILITY

355

Online Edition for Part no. 01405A604A9 - VI/22

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022





























































































































































































































































































































































































































































Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands

BMW X5 xDrive45e PLUG-IN HYBRID 2022, Owner'S Manual

Search results

Summary of Contents for X5 xDrive45e PLUG-IN HYBRID 2022

Reviews:

Related manuals for X5 xDrive45e PLUG-IN HYBRID 2022

Brands by name

Popular brands