manualshive.com logo in svg

BMW X3 xDrive20d 2013, Owner'S Handbook Manual

Share
Download
BMW X3 xDrive20d 2013 Owner'S Handbook Manual Download Page 200

5.

"Configure device"

6.

"Audio"

7.

"OK"

Disconnecting a device

1.

"CD/Multimedia"

2.

"Bluetooth (audio)"

3.

If applicable, "Bluetooth audio"

4.

Highlight the device to be disconnected.

5.

Call up "Options".

6.

"Remove device from list"

What to do if...

Visit www.bmw.com/bluetooth for more infor‐
mation on compatible devices.
Compatible mobile phones, see page 

208

Device not supported by the vehicle.

▷

If applicable, perform a software update, see
page 

200

.

Device not registered or paired.

▷

Do the Bluetooth passkeys for device and
vehicle match. Enter the same passkey on
the device and using iDrive.

▷

Duration for passkey input longer than
30 seconds. Repeat the connection at‐
tempt.

▷

Too many Bluetooth devices paired to the
device or the vehicle? If necessary delete
the pairing information for some other de‐
vice.

▷

Is the mobile phone in power-save mode or
is the battery low? Charge the mobile phone

using the snap-in adapter or the charging
cable.

▷

If appropriate, only one device can be con‐
nected to the vehicle, depending on the mo‐
bile phone. De-register the device from the
vehicle and only register and connect one
device.

▷

Is the device no longer responding. Switch
the device off and on again.

▷

Repeat the connection attempt.

No music can be played back.

▷

Start the program for playing back music
files on the device and if necessary, select a
track via the device.

▷

Switch the radio off and on again.

Music files are played back, but only at low vol‐
ume.

▷

Adjust the volume controls on the device.

Playback is disrupted when a button is pressed
on the device or if other messages are issued via
the device.

▷

Switch off keypad acknowledgement tones
and other audio output at the device.

Playback is interrupted by phone calls or traffic
announcements and does not resume automat‐
ically.

▷

Switch the radio off and on again.

Playback not possible if the mobile phone is
connected via both Bluetooth Audio and the ex‐
tended connectivity of the music player in the
mobile phone option.

▷

Disconnect one of the two pairing connec‐
tions, for example disconnect audio connec‐
tion, see page 

199

, and restart playback.

If all the points on the list have been reviewed
and the desired function cannot be run, contact
Hotline or Service Centre.

Software update

Depending on the current software, the vehicle
supports different external devices. A software
update may be supported, for example, by a new

Seite 200

Entertainment

CD/multimedia

200

Online Edition for Part no. 01 40 2 900 867 - 03 12 490

Summary of Contents for X3 xDrive20d 2013

























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands