BMW X3 M, Owner'S Manual

Page: 252 / 396

Display on the Control Display
Toolbars
The assistance functions can be activated man‐
ually via the toolbars on the sides of the Control
Display.
1. Move the Controller to the right, if needed.
2. With corresponding equipment:
"Camera image"
3. ▷ "Parking aid lines".
Pathway lines and turning circle lines are
displayed.
▷ "Obstacle mark.".
Depending on the vehicle equipment, the
obstacles detected by PDC Park Distance
Control are displayed by markings.
More than one assistance function can be active
at the same time.
Parking aid lines
Lanes
Lanes help you to estimate the space required
when parking and maneuvering on level roads.
Lanes depend on the steering angle and are
continuously adjusted to the steering wheel
movements.
Turning circle lines
Turning circle lines can only be superimposed on
the camera image together with lanes.
Turning circle lines show the course of the small‐
est possible turning radius on a level road.
Only one turning circle line is displayed after the
steering wheel is turned past a certain angle.
Parking using lanes and turning circle lines
1. Position the vehicle so that the red turning
circle line leads to within the limits of the
parking space.
2. Turn the steering wheel to the point where
the green lane covers the corresponding
turning circle line.
Obstacle marking
Depending on the vehicle equipment, obstacles
behind the vehicle are detected by the PDC Park
Distance Control sensors.
Obstacle markings can be faded into the image
of the rearview camera.
Seite 252
CONTROLS
Driver assistance systems
252
Online Edition for Part no. 01405A37822 - VI/21