BMW X2 2021, Owner'S Manual

Page: 72 / 304

▷ Press button on the inside of the tailgate, ar‐
row 1.
▷ Press button, arrow 2.
The vehicle will be locked after closing the
tailgate. The driver's door must be closed for
this purpose and the vehicle key must be out‐
side of the vehicle in the area of the tailgate.
Interruption of the closing procedure
The closing procedure is interrupted in the fol‐
lowing situations:
▷ If the vehicle starts off with a jerky movement.
▷ By pressing the button on the outside of the
tailgate. Pressing again re-opens the tailgate.
▷ By pressing the button on the inside of the
tailgate. Pressing again re-opens the tailgate.
▷ By releasing the button in the storage com‐
partment of the driver's door. Pulling again
and holding continues the closing motion.
Malfunction
Safety information
Warning
With manual operation of a blocked tailgate, it
can release itself unexpectedly from the block‐
age. There is a risk of injury or risk of damage
to property. Do not operate the tailgate man‐
ually if it is blocked. Have it checked by a deal‐
er’s service center or another qualified service
center or repair shop.
Manual operation
Operate the unlocked tailgate manually with a
slow and smooth motion.
To close the tailgate fully, press down lightly
only. Closing occurs automatically.
Driver profiles
Concept
In the driver profiles, individual settings for sev‐
eral drivers can be stored and called up again
when required.
General information
There are three driver profiles with which per‐
sonal vehicle settings can be stored. Every vehi‐
cle key has been assigned one of these driver
profiles.
If the vehicle is unlocked using a vehicle key, the
assigned personal driver profile will be activated.
All settings stored in the driver profile are auto‐
matically applied.
If several drivers use their own vehicle keys, the
vehicle will apply the personal settings as it is be‐
ing unlocked. These settings are also restored, if
the vehicle has been used in the meantime by a
person with a different vehicle key.
Changes to the settings are automatically stored
in the driver profile currently activated.
If another driver profile is selected via iDrive, the
settings stored in it will be applied automatically.
The new driver profile is assigned to the vehicle
key that is currently in use.
There is an additional guest profile available that
is not assigned to any vehicle key. It can be used
to apply settings in the vehicle without changing
the personal driver profiles.
Functional requirements
For the system to be able to identify the driver
profile associated to a particular driver, the de‐
Seite 72
CONTROLS
Opening and closing
72
Online Edition for Part no. 01405A2CF16 - II/21