BMW Communication System WCS-1
39
Pairing and function check
Pairing two WCS-1 helmets
•
Switch on WCS-1 in both
helmets by pressing and
holding down (> 2 seconds)
the "
Select On/Off
" multi-
function button on the plas-
tic-foil keypad of each
helmet.
•
The green LEDs on both the
WCS-1 helmets flash very
rapidly (setup mode).
•
Briefly press the "
+
" button
on the first WCS-1 helmet:
this helmet is now visible to
the second WCS-1 helmet
for 30 seconds.
•
The green LED of the first
WCS-1 helmet flashes rapid-
ly (pairing mode).
•
Now press and hold down
(> 2 seconds) the "
+
" button
on the second WCS-1
helmet.
•
This helmet now looks for the
first WCS-1 helmet.
•
The green LED flashes rapid-
ly to indicate this helmet, too,
is in pairing mode.
•
As soon as the two WCS-1
helmets successfully com-
municate with each other,
the setting is saved in both.
•
The second WCS-1 helmet
issues an acoustic acknowl-
edgement signal in the form
of a high-pitched tone.
•
The second WCS-1 helmet's
green LED lights up for 1
second to indicate that pair-
ing was successful.
•
Both WCS-1 helmets change
to setup mode, and the green
LEDs flash very rapidly.
BA_Helmkommsys_WCS1.book Seite 39 Dienstag, 22. Februar 2005 2:32 14