Thread neck straps
2
using
a suitable tool on both sides
through the cheek / neck
pads
1
. Ensure that the neck
straps are not twisted.
Thread chinstrap
1
on both
sides through the neck
straps
2
and cheek/neck
pads
3
into the inside of the
helmet.
Close the snap fasteners
1
on
both sides.
Insert pin of welt
1
into the
dedicated opening between
outer and inner helmet shell.
Insert welt
1
all around into the
helmet edge.
Insert the pin
arrow
of welt
1
,
which has no contact yet, into
the designated opening on the
other side of the helmet.
Removing head pad
Loosen locking tab
1
and snap
fastener
2
.
Loosen Velcro elements from
the centre bar and remove
head pad
3
.
4
11
z
Maintenance