BMW S 1000XR 2018, Rider'S Manual

Page: 78 / 241

engine again, or use jumper ca-
bles and a donor battery to start.
More detailed information can
be found in the "Maintenance"
chapter under "Jump-starting".
Engine starts.
Consult the troubleshooting
chart if the engine refuses to
start. (
186)
Pre-Ride-Check
During the "Pre-Ride-Check", the
instrument-cluster module ex-
ecutes a test routine to check
the status of the warning lights,
the tachometer and the display.
Starting the engine before the
test routine is completed will
cancel the remainder of the rou-
tine.
Phase 1
with anti-theft alarm system
(DWA)
OE
The LED 1 flashes briefly in red.
The general warning light 2 lights
up red.
All segments are shown in the
display.
The indicator and warning
lights
4 light up.
with cruise control OE
Depending on the equipment,
the indicator and warning lights
5
light up.
The tachometer needle 3 is
run up to the maximum engine
speed.
Phase 2
The general warning light 2
changes from red to yellow.
Phase 3
The tachometer needle drops to
zero.
The indicator and warning lights
go out or adopt their functions
for operation.
The display reverts to the stan-
dard format. The onboard com-
puter is displayed.
Should one of the warning lights
fail to appear:
6
76
z Riding