BMW R 1250RS, Rider'S Manual

Page: 81 / 279

change in the ASC⁄DTC
setting.
ABS indicator and warning
light comes on.
Possible ABS system status
OFF!
is displayed.
Release button 1 after the ABS
system status changes over.
The ASC⁄DTC system status
remains unchanged and a new
ABS system status
OFF!
is
briefly displayed.
ABS indicator and warning
light remains on.
The ABS function is switched
off.
The integral function remains
active.
without riding modes Pro
OE
Hill Start Control is still
activated.
with riding modes Pro OE
Hill Start Control Pro is still
activated.
with riding modes Pro
OE
The function of the Dynamic
Brake Control is also switched
off when the ABS function is
switched off.
See the section entitled "En-
gineering details" for more in-
formation on brake systems
with BMW Motorrad Integ-
ral ABS:
Partially integral brakes
(
150)
Hill Start Control function
(
161)
with riding modes Pro OE
Dynamic Brake Control func-
tion (
157)
Activating the ABS
function
Press and hold button 1 until
the ABS indicator and warning
light changes its display beha-
viour.
Immediately after the button 1 is
pressed, the system statuses for
ASC⁄DTC and ABS are displayed
as
OFF!
.
ABS indicator and warning
light goes out; if self-dia-
gnosis has not been completed,
it starts to flash.
4
79
z Operation