BMW R 1250RS, Rider'S Manual

Page: 57 / 279

Possible cause:
ABS self-diagnosis not
completed
The ABS function is not avail-
able, because self-diagnosis
did not complete. (The motor-
cycle has to reach a defined
minimum speed for the wheel
speed sensors to be checked:
5 km/h)
Pull away slowly. Bear in mind
that the ABS function is not
available until self-diagnosis has
completed.
ABS deactivated
ABS indicator and warning
light comes on.
Off!
ABS deactivated.
Possible cause:
The rider has switched off the
ABS system.
Activating the ABS function
(
79).
ABS fault
ABS indicator and warning
light comes on.
Limited ABS availab-
ility! Riding at mod.
speed pos. Ride carefully
to next specialist work-
shop.
Possible cause:
The ABS control unit has
detected a fault. The partially
integral function and the
Dynamic Brake Control function
have failed. The ABS function
has limited availability.
You can continue to ride. Take
note of the more detailed in-
formation on certain situations
that can lead to an ABS fault
message (
151).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
Retailer.
ABS failed
ABS indicator and warning
light comes on.
ABS failure! Riding
at mod. speed pos.
Ride carefully to next
specialist workshop.
Possible cause:
The ABS control unit has detec-
ted a fault. The ABS function is
not available.
You can continue to ride. Take
note of the more detailed in-
formation on certain situations
that can lead to an ABS fault
message (
151).
3
55
z Status indicators