BMW R 1250RS, Rider'S Manual

Page: 188 / 279

Tighten the nut 3 of the
clamp 4 .
Clamp to silencer and
exhaust manifold
22 Nm
Fit the bolt 2 of the cover 1 .
with HP Sports silencer
OE
ATTENTION
Tightening threaded fasten-
ers to incorrect tightening
torque
Damage, or threaded fasteners
work loose
Always have the security of
the fasteners checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Slip clamp onto the silencer.
Push on the silencer
1 until
seated.
Fit shim
3 and screw 2 .
Silencer to rear frame
19 Nm
Tighten the nut 1 of the
clamp 2 .
Clamp to silencer and
exhaust manifold
22 Nm
Lighting
Replacing bulbs for front
and rear turn indicators
Place the motorcycle on its
stand on firm, even ground.
Switch off the ignition.
9
186
z Maintenance