BMW R 1200RT 2016 Rider'S Manual Download

Page: 26 / 229

Warning lights

Display

Warnings are displayed with ap-
propriate warning lamps.

Warnings for which there is no
specific individual warning lamp
are indicated by the universal
warning lamp

in conjunction

with a warning symbol such
as

shown on the multifunction

display. The universal warning
lamp lights up in either yellow or
red depending on the urgency of
the warning.

Up to four warning symbols can
be displayed at any given time.
The universal warning lamp lights
up for the most urgent warning.

You will find an overview of the
potential warnings on the follow-
ing pages.

Displays

ProCarManuals.com

Summary of Contents for R 1200RT 2016






































































































































































































































Search results

Summary of Contents for R 1200RT 2016

Reviews:

Related manuals for R 1200RT 2016

Brands by name

Popular brands

BMW R 1200RT 2016, Rider'S Manual

Search results

Summary of Contents for R 1200RT 2016

Reviews:

Related manuals for R 1200RT 2016

Brands by name

Popular brands