BMW R 1200RS 2016, Rider'S Manual

Page: 40 / 223

Possible cause:
The ABS system has been deac-
tivated by the rider.
Switch on ABS function.
ASC/DTC intervention
flashes rapidly.
ASC/DTC has detected in-
stability at the rear wheel and re-
sponded by reducing the torque.
The indicator and warning light
flashes longer than the ASC/DTC
intervention lasts. This feature
continues to furnish the rider with
visual feedback confirming that
the system has initiated active
closed-loop intervention even
after the critical situation has
passed.
ASC/DTC self-diagnosis
not completed
flashes slowly.
Possible cause:
ASC/DTC self-diagnosis
routine not completed
ASC/DTC is not available, as
the self-diagnosis routine was
not completed. (The motor-
cycle must reach a specified
minimum speed before the
system can check operation
of the wheel speed sensors:
3 mph (5 km/h))
Ride off slowly. The ASC/DTC
indicator and warning light
must go out after a few yards.
If the ASC/DTC indicator and
warning light continues to flash:
Contact an authorized service
facility, preferably an authorized
BMW Motorrad retailer.
ASC/DTC switched off
lights up.
Possible cause:
The ASC/DTC function has been
deactivated by the rider.
Activating ASC/DTC ( 66).
ASC/DTC error
lights up.
Possible cause:
The ASC/DTC control unit has
detected an error. The ASC/DTC
function is not available.
It remains possible to continue
riding. It must be noted that
the ASC/DTC function is not
available. Observe the addi-
tional information on situa-
tions that can lead to a fault
(
103).
Have the malfunction corrected
as soon as possible at an
authorized service facility,
preferably an authorized
BMW Motorrad Retailer.
3
38
z Displays
ProCarManuals.com