BMW R 1200 ST -, Rider'S Manual

Page: 69 / 166

Adjusting suspension
damping
Switch on the ignition.
Press button 1 .
The current setting is dis-
played.
Press button
1 once briefly.
The display field starts
at the current status and
cycles through the following
sequence:
COMF Comfortable damping
characteristic
NORM Normal damping
characteristic
SPORT Sporty damping
characteristic
The setting shown on the
display is automatically
accepted as the damping
characteristic if you allow
a certain length off time
to pass without pressing
button
1 . During the setting
procedure, the display
flashes.
Adjusting spring preload
Start the engine.
Press button 1 .
The current setting is dis-
played.
Press button
1 once,
without releasing it
immediately.
You cannot adjust spring
preload while the motor-
cycle is on the move.
The display field starts
at the current status and
cycles through the following
sequence:
One-up
One-up with luggage
Two-up (with luggage)
The setting shown on the
display is automatically
accepted as the spring
preload if you allow a
certain length off time to
4
67
z Operation
ProCarManuals.com