BMW R 1200 RT 2011, Rider'S Manual

Page: 110 / 161

Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Seat the rear wheel on the
rear-wheel adapter.
Install screws 3 and tighten to
the specified tightening torque.
Rear wheel to wheel car-
rier
Tightening sequence:
tighten in diagonally
opposite sequence
60 Nm
Push the end silencer onto the
pipe at the exhaust-flow control
valve and turn it to its initial
position.
If the gap between the rear
wheel and the silencer is
too small, the rear wheel can
overheat.
The gap between the rear wheel
and the silencer must be at least
20 mm.
Align the silencer, install
screw
2 and tighten to the
specified torque.
Silencer to rear frame
19 Nm
Slip the clamp forward as far as
it will go and turn it so that R/
8
108
z Maintenance
ProCarManuals.com