BMW R 1200 GS 2003 Page 78 Rider'S Manual Download

Page: 78 / 206

Place the motorcycle on
its main stand.

Warning:

For safety reasons, never sit
on the motorcycle with the
main stand extended.

Attention:

Stop the engine before using
the main stand.
Make sure the surface under
the stand is firm.

• Switch off the ignition
• Hold the left handlebar grip

with your left hand

• Grip luggage rack

or rear

frame

with your right hand.

• Place your right foot on the

pin of the main stand, and
press the stand down until its
curved feet touch the ground

• Apply all your body weight to

the stand

• Pull the motorcycle to the rear

and upwards (arrow) until it
rests on the main stand

• Check that the motorcycle is

firmly supported

Parking

Summary of Contents for R 1200 GS 2003















































































































































































































Search results

Summary of Contents for R 1200 GS 2003

Reviews:

Related manuals for R 1200 GS 2003

Brands by name

Popular brands

BMW R 1200 GS 2003, Rider'S Manual

Search results

Summary of Contents for R 1200 GS 2003

Reviews:

Related manuals for R 1200 GS 2003

Brands by name

Popular brands