Night Vision Control Unit
The control unit is accommodated in the front
device holder behind the glovebox.
The control unit increases the image data from
the camera from 320 x 240 pixels to 640 x 480
pixels. Only one detail is shown in the control
display. 640 x 240 pixels are displayed when the
"Full screen" function is activated while 400 x
240 pixels are displayed for the splitscreen function. The diagnosis, programming and
coding data are transmitted to the camera via the control unit.
The camera and the front-lens heater are powered via the control unit. In addition, the
control unit converts the symmetrical image data from the camera into a CVBS signal
and, depending on the equipment specification, makes this signal available to either the
navigation system or the video module.
The Night Vision control unit is accommodated in the front device holder behind the
glovebox.
The camera-housing cover features a 12-pin plug connection.
Button in Light Switch Center
The button for switching BMW Night Vision on and off is integrated in the light switch
center.
14
BMW Night Vision
12-pin Plug Connection
Switch/Button on E65/66
Switch/Button on E60/E61/E63/E64
