BMW Mini Cooper, Owner'S Manual

Page: 48 / 198

Driving
46
>
Pull one of the shift paddles.
Transmission shifts up.
> Push one of the shift paddles.
Transmission shifts down.
M1 to M6 is displayed in the gear indicator.
Overriding the selector lever lock
Should the selector lever refuse to move out of
position P although the button on the selector
lever is pressed, the selector lever lock can be
overridden:
1. Unclip the sleeve of the selector lever.
2. Pull the sleeve up over the selector lever
until the sleeve is inside out. Disconnect the
cable connector if necessary.
3. Depress the brake.
4. Take the hub cover remover 1 out of the
onboard toolkit and insert it in the loop on
the front passenger side.
5. Pull up the loop while at the same time mov-
ing the selector lever into the desired posi-
tion.
Turn signals/
headlamp flasher
1 Turn signal indicators
2 Headlamp flasher
Using turn signals
Press the lever beyond the resistance point.
To turn off manually, press the lever to the resis-
tance point.
Unusually rapid flashing of the indicator
lamp indicates that a bulb has failed.
<
Indicating a turn briefly
Press the lever as far as the resistance point for
as long as you wish to indicate a turn.
Triple turn signal activation
Press the lever as far as the resistance point.
Turn signal flashes once.
You can set whether the turn signal is to flash
once or three times.
1. Press the button.
This opens the start menu.
2. Move the MINI joystick to highlight "Setup"
and press the MINI joystick.
3. Select "Settings".
4. Select "Vehicle and tires".
Online Edition for Part no. 01 41 0 013 328 - © 01/07 BMW AG