Symbol Meaning
M double-clutch transmission with
Drivelogic, refer to page
modes and Drivelogic driving pro‐
grams.
Views of the Head-Up Display, refer
to page
Configuring M Drive
The preassigned configurations can be individ‐
ually adjusted.
1.
"Settings"
2.
"M Drive 1" or"M Drive 2"
3.
Select the desired setting option.
4.
Select the desired channel.
The individual settings are stored for the re‐
mote control currently in use.
If M Drive is activated, a change in the setting
on the Control Display is immediately adopted.
Activating/deactivating M Drive
Activating
Press the corresponding button on the steer‐
ing wheel:
▷
Activate M Drive 1.
▷
Activate M Drive 2.
If DSC OFF or MDM is set in M Drive, a mes‐
sage appears in the instrument cluster. This
message is confirmed by pressing the button
again.
Deactivating
Press the corresponding button on the steer‐
ing wheel.
Indicator lamps
▷
Indicator lamp comes on: corre‐
sponding M Drive is activated.
▷
Indicator lamp flashes: M Drive
could not be activated. Antilock
braking system ABS or Dynamic
Stability Control DSC directly regu‐
late the driving stability.
Reactivate M Drive if indicator lamp
is no longer flashing.
Notes
If M Drive is activated, individual settings can
also be modified outside of M Drive, e. g. using
the buttons in the center console. This deacti‐
vates M Drive.
To reactivate all settings made for M Drive on
the Control Display, briefly press one of the fol‐
lowing buttons:
▷
▷
To adopt the changed settings in M Drive,
press and hold the corresponding button.
Resetting M Drive
Individual settings can be reset to default val‐
ues.
1.
"Settings"
2.
"M Drive 1" or"M Drive 2"
3.
"Reset M Drive 1" or"Reset M Drive 2"
4.
"Yes"
To cancel resetting: "No"
Seite 60
Controls
Adjusting
60
Online Edition for Part no. 01 40 2 910 746 - VI/13
Online Edition for Part no. 01 40 2 926 037 - XI/13
