▷
Parking lamps and roadside parking lamps.
▷
Turn signals, incl. side indicators
▷
Daytime running lights
Contact your service center in the event of a
malfunction.
Turning lamp on the Xenon headlamp
Follow the general instructions on lamps and
bulbs, refer to page
.
The illustration shows the left side of the en‐
gine compartment.
55-watt bulb, H3
1.
Turn the cap and remove it.
2.
Detach the wire bracket.
3.
Disconnect the cable at the plug-in con‐
nection and remove the bulb.
4.
Insert the new bulb. Ensure that the bulb
has the correct orientation. Because of its
shape, the bulb can only be inserted in one
direction.
5.
Secure the bulb with the wire bracket.
6.
Connect the bulb.
7.
Mount the cap.
LED headlamps
Light-emitting diodes (LEDs)
Follow the general instructions on Lamps and
bulbs, refer to page
With LED headlamps, all front lamps and side
indicators are designed with LED technology.
Contact your service center in the event of a
malfunction.
Tail lamps, bulb replacement
At a glance
1 Turn signal/brake lamp
2 Reversing lamp
3 Inside brake lamp
4 Tail lamp
5 Outside brake lamp
6 Rear reflector
Turn signal, outer brake, tail, and
license plate lamps
Follow the general instructions on lamps and
bulbs, refer to page
These lights feature LED technology.
Contact your service center in the event of a
malfunction.
Seite 186
Mobility
Replacing components
186
Online Edition for Part no. 01 40 2 910 746 - VI/13
Online Edition for Part no. 01 40 2 926 037 - XI/13