DIGITAL KEY.
KEYREADER PLUS MOBIL: VIN READING FROM KEY-CARD.
Figure 1: Configuration side for the KeyReader Plus with new button below
1. This additional function can only be used via
the configuration interface (see
figure 1
) with
SW version v.31
2. To do this, the KeyReader Plus must be
connected to a Windows computer via USB
and the KeyReader Plus USB driver must be
installed.
3. Then please insert the following IP-Adress
(http://
192.168.17.17
) in a released Internet
Browser for ISPI Next.
4. A new button "
NFC KeyCard Reading Mode
"
is available at the bottom of the configuration
page. This puts the device in the new operating
mode.
5. In this operating mode, normal key reading and
the transmission of key data is turned off.
6. The operating mode can be seen on the device
by the fact that the middle LED flashes white.
