BMW K1600GTL, Rider'S Manual

Page: 40 / 205

ABS self-diagnosis not
completed
ABS warning light flashes.
Possible cause:
The self-diagnosis routine was
not completed; the ABS func-
tion is not available. The motor-
cycle must reach a speed of at
least 3.1 mph (5 km/h) before the
ABS self-diagnosis routine can
be completed.
Ride off slowly. It must be
noted that the ABS function
is not available until the self-
diagnosis has been completed.
ABS error
ABS warning light lights up.
Possible cause:
The ABS control unit has de-
tected an error. The ABS func-
tion is not available.
Continued driving is possible
while taking the failed ABS
function into account. Observe
additional information on situa-
tions which can lead to an ABS
error (
105).
Have the malfunction corrected
as soon as possible at an au-
thorized workshop, preferably
an authorized BMW Motorrad
retailer.
DTC intervention
DTC warning light flashes
rapidly.
The DTC has detected insta-
bility at the rear wheel and has
reduced the torque. The warn-
ing light flashes longer than the
DTC intervention lasts. This fea-
ture continues to furnish the rider
with visual feedback confirm-
ing that the system has initiated
active closed-loop intervention
even after the critical situation
has passed.
DTC self-diagnosis not
completed
DTC warning light flashes
slowly.
Possible cause:
The self-diagnosis was not com-
pleted; the DTC function is not
available. The engine must be
running and the motorcycle must
be moved at a speed of at least
3.1 mph (5 km/h) in order for
DTC self-diagnosis to complete.
Ride off slowly. It must be
noted that the DTC function
is not available until the self-
diagnosis has been completed.
DTC deactivated
DTC warning light lights up.
Possible cause:
The DTC system has been deac-
tivated by the driver.
Switch on DTC.
3
38
z Displays