EN
11
Firmware update
Prepare USB stick
1. Format a USB stick with the FAT32 file system.
2. Copy the following files into the root directory
of the empty USB stick. Do not use any
folders.
firmware.bin
firmware.chk
Complete firmware update
1. Insert the USB stick into USB port
X5
on the charging station.
2. Press the service button
T1
until the
1st signal tone
sounds to reset the charging station.
The firmware update will now be completed. The internal status
LED
next to the service
button will now flash in various colours and at various intervals. The update process can take
up to 1 minute.
After the installation has completed, the internal status LED will be lit
permanently in green
.
3. Remove the USB stick to trigger a restart of the charging station.
4. Check the firmware version.
Binary version display with a colour code on the status LED during power up.
The firmware version is also displayed in the web interface of the charging station.