BMW F 800 R 2014, Rider'S Manual

Page: 107 / 183

Install securing screws 4 on left
and right with specified torque.
Brake caliper on tele-
scopic forks
28 lb/ft (38 Nm)
Remove adhesive tape from
wheel rim.
WARNING
Brake pads do not contact
the brake disk.
Delayed braking action.
Before driving off, check that
the braking effect kicks in with-
out any delay.
Engage the brakes repeatedly,
continuing until the brake pads
seat against the rotors.
Locate wheel speed sensor
lead in the retaining clips
1
and 2 .
Insert wheel speed sensor in
bore and install screw
3 .
Wheel speed sensor at
front on fork
7 lb/ft (9 Nm)
Removing rear wheel
Press brake caliper 1 against
brake disk 2 .
Brake pistons are pressed
back.
Remove screw 1 and take
speed sensor out of bore.
Make sure ground is level and
firm and place motorcycle on a
suitable auxiliary stand.
with center stand OE
Place motorcycle on center
stand, ensuring that it is rest-
ing on a firm and level support
surface.
9
105
z Maintenance
ProCarManuals.com