BMW F 800 GS - Rider'S Manual Download

Page: 93 / 153

If pressure points are not clearly
perceptible:

Have the brakes checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.

Brake pads

Checking brake-pad
thickness, front brakes

Make sure the ground is level
and firm and place the motor-
cycle on its stand.

Visually inspect the left and
right brake pads to ascertain

their thickness. Viewing direc-
tion: Between wheel and fork
tube toward brake caliper

Brake-pad wear limit,
front

min 1.0 mm (Friction pad
only, without backing
plate. The wear indicators
(grooves) must be clearly
visible.)

If the wear indicating marks are
no longer clearly visible:

Have the brake pads replaced
by a specialist workshop,

preferably an authorised BMW
Motorrad dealer.

Checking brake pad
thickness, rear brakes

Make sure the ground is level
and firm and place the motor-
cycle on its stand.

Visually inspect brake pads

from the right to ascertain their
thickness.

Maint

nance

Summary of Contents for F 800 GS -


























































































































































Search results

Summary of Contents for F 800 GS -

Reviews:

Related manuals for F 800 GS -

Brands by name

Popular brands

BMW F 800 GS -, Rider'S Manual

Search results

Summary of Contents for F 800 GS -

Reviews:

Related manuals for F 800 GS -

Brands by name

Popular brands