BMW F 750 GS Page 140 Rider'S Manual Download

Page: 140 / 348

134

TFT DISPLAY

ON-BOARD COMPUTER

Calling up on-board computer

Call up the

My vehicle

menu.

Scroll to the right until the

ON-BOARD COMPUTER

screen is displayed.

Resetting on-board computer

Call up the on-board com-

puter (

134).

Press down the MENU rocker

button.

Select

Reset all values

Reset individual values

and confirm.

The following values can be

reset:

Break
Journey
Current

(

TRIP 1

)

Speed
Consump.

Calling up trip computer

Call up the on-board com-

puter (

134).

Scroll to the right until the

TRIP COMPUTER

screen is displayed.

Resetting trip computer

Call up the trip computer

(

134).

Press down the MENU rocker

button.

Select

Autom. reset

Reset all values

and con-

firm.

Autom. reset

is selected,

the trip computer is automat-

ically reset when a minimum

of 6 hours have passed and

the date has changed since

the ignition was switched off.

NAVIGATION

Warnings

WARNING

Using a smartphone during

the journey or while the en-

gine is running

Risk of accident

Always observe the relevant

road traffic regulations.

Do not use the smartphone

during the journey (apart

from applications that do

not require operation, e.g.

making telephone calls with

the hands-free system).

Summary of Contents for F 750 GS





























































































































































































































































































































































Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands

BMW F 750 GS, Rider'S Manual

Search results

Summary of Contents for F 750 GS

Reviews:

Related manuals for F 750 GS

Brands by name

Popular brands