BMW F 700 GS 2012 Page 117 Rider'S Manual Download

Page: 117 / 162

Replacing brake light and
rear light bulb

The LED rear light can be re-
placed only as a complete unit.
Consult a specialist workshop,
preferably an authorised BMW
Motorrad dealer.

Replacing turn indicator
bulbs, front and rear

without LED turn indicators

Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.

Remove screw

Pull the glass out of the re-
flector housing at the threaded-
fastener side.

Turn bulb

counter-clockwise

and remove it from the bulb
housing.

Replace the defective bulb.

Bulbs for flashing turn
indicators, front

R10W / 12 V / 10 W
with LED turn indicators

LED / 12 V

Use a clean, dry cloth to hold
the new bulb in order to keep
the glass free of foreign matter.

115

Maintenance

ProCarManuals.com

Summary of Contents for F 700 GS 2012



































































































































































Search results

Summary of Contents for F 700 GS 2012

Reviews:

Related manuals for F 700 GS 2012

Brands by name

Popular brands

BMW F 700 GS 2012, Rider'S Manual

Search results

Summary of Contents for F 700 GS 2012

Reviews:

Related manuals for F 700 GS 2012

Brands by name

Popular brands