BMW C 600 Sport, Rider'S Manual

Page: 101 / 154

Clamping screws (quick-
release axle) in tele-
scopic forks
Tightening sequence: Tighten
screws six times in alternate
sequence
8 Nm
Remove the front-wheel stand.
Ease the brake calipers on to
the brake discs.
Tighten screws 2 on left and
right to the specified tightening
torque.
Brake caliper to fork leg
28 Nm
The cable of the wheel-
speed sensor could chafe
through if it comes into contact
with the brake disc.
Make sure that the sensor
cable is routed correctly.
Insert the ABS sensor into its
bore and install screw
1 .
Remove the adhesive tape
from the wheel rim.
Firmly pull the handbrake lever
until the pressure point is per-
ceptible, and repeat this opera-
tion several times.
Hold the front-wheel cover in
position and install screws
1
and 2 on left and right.
Remove the rear wheel
Make sure the ground is level
and firm and place the Maxi-
Scooter on its centre stand.
9
99
z Maintenance