BMW 84 64 0 398 229, Installation Instructions Manual, Page: 13 / 14

13 © BMW AG, München 01 29 0 401 237 02.2005 (Z/Z)
10. To register the mobile phone in the car (cars with SA 606 or SA 609 only)
The registration, also known as “pairing” can only be carried out if the encoding has been
successful.
The Bluetooth code required for the pairing process, an arbitrary number with 1 – 16 figures, can be
freely selected.
After the installation of the ULF upgrade and the insertion of the mobile phone holder (snap-in adapter),
the mobile phone must be registered as follows:
- Switch on the mobile phone
- Switch on the ignition, the main menu will appear in the on-board monitor
- Press the controller and select the
INFORMATION menu point
- Select the
COMMUNICATION INTERFACE
menu point using the controller
- Press the controller, BLUETOOTH COMMUNICATION ACTIVE will appear in the on-board
monitor
- Push the controller forwards, turn it anti-clockwise and select the TELEPHONE menu point
- Press the controller, BLUETOOTH CONNECTABLE IN THIS MENU will appear in the on-board
monitor
- Select and activate the Bluetooth option on the mobile phone. (The steps required for this differ from
phone to phone, see the manual supplied with the phone under searching for Bluetooth device,
connecting BT device, pairing BT device)
- After a successful search the display on the phone will show FOUND , the car will register itself on the
phone with a 5-digit number. Select the SELECT menu point
- Turn the controller and select the ADD DEVICE menu point
- Press the controller, PASSKEY will appear in the on-board monitor
- Enter a freely selectable 1 – 16-digit Bluetooth code using the controller
- Slide the controller downwards and select the
CONFIRM PASSKEY menu point
- Press the controller
- Select
CONNECTION
or
REGISTRATION
on the mobile phone and confirm this
- CONNECTED will appear on the mobile phone
You have a maximum of 10 seconds to enter the passkey or Bluetooth code.
- Enter the same passkey and Bluetooth code in the mobile phone and confirm
- The message
HANDS-FREE ACCEPTED will appear on the mobile.
- Press the menu button next to the controller twice
- Switch off the ignition for at least 30 seconds
- Quit the mobile phone sub-menu again
If the registration process was not completed successfully, repeat the entire process quickly.