BMW 84 64 0 303 121, Installation Instructions Manual, Page: 15 / 15

15 © BMW AG, München EBA-Nr.: 01 29 0 303 548 Stand: 05.2004
10. To register the handset
The registration can only be carried out if the encoding has been successful.
After installing the Professional car phone upgrade, the handset must be registered with the TCU as
follows:
- Take the handset out of the mounting and switch if off
- Turn the ignition key to the 2 position
- Open the start menu by pressing the “
MENU
” button on the controller
- Open the “
INFO
” menu by pressing the controller and select “
COMMUNICATIONS SETTINGS
”
- „Select “
BLUETOOTH
” and confirm this selection by pressing the controller
(activation is indicated by a tick)
- Select “ PHONE/MODEM ” using the controller and confirm your selection by pressing it
- „Select “ BLUETOOTH REGISTRATION IN THIS MENU ” and confirm your selection by pressing
the controller
- Switch on the handset. The handset will automatically go into connection mode
(display “ SEARCHING ”). The handset will now search for a Bluetooth device
- The Control Display will show “ EXTERNAL DEVICE KNOCKING ”
- „Confirm “ ADD DEVICE ” by pressing the controller
- Enter the “ PASSKEY ” using the controller. This passkey can be freely selected and is confirmed by
pressing the controller
- Enter the same passkey on the handset and confirm using “ OK ”
- A message will appear on the handset “ CONNECTION SUCCESSFUL ”, followed by
“ INSERT SIM CARD ” or “ PLEASE WAIT ”
- The handset is not registered with the TCU
- Insert the SIM card and conduct a function test