BMW 650i Coupe, Owner'S Manual

Page: 245 / 282

1. Unscrew the cap and remove it.
2. Detach the wire bracket.
3. Disconnect the cable at the plug-in connec‐
tion and remove the bulb.
4. Insert the new bulb. Ensure that the bulb has
the correct orientation. Because of its
shape, the bulb can only be inserted in one
direction.
5. Secure the bulb with the wire bracket.
6. Connect the bulb.
7. Mount the cap.
Tail lamps, bulb replacement
At a glance
1 Turn signal
2 Backup lamp
3 Inside brake lamp*
4 Tail lamp
5 Outside brake lamp
6 Rear reflector*
Turn signal, outer brake, tail, and
license plate lamps
Follow the general instructions on lamps and
bulbs, refer to page
243 .
These lights are made using LED technology.
Contact your service center in the event of a
malfunction.
Lamps in the trunk lid
Access to the lamps
Remove the five screws using the screwdriver
from the tool kit and fold away the cover.
Inside brake lamp*
Follow the general instructions on lamps and
bulbs, refer to page
243 .
24-watt bulb, HP24W
1. Squeeze the bulb holder and pull it out.
2. Pull off the connector.
Seite 245
245
Online Edition for Part no. 01 40 2 606 521 - 03 11 490
Reference
Mobility
Communication
Entertainment
Navigation
Driving tips
Controls
At a glance