manualshive.com logo in svg

BMW 65 90 0 028 873, Installation Instructions Manual

Share
Download
BMW 65 90 0 028 873 Installation Instructions Manual Download Page 20

You can select the language for acoustic messages using the "Language” option in the
"Settings” menu.
Two languages (voices) can be stored in the system.
If required by the customer, one of the two languages can be substituted by another language
from the enclosed system software CD.

To load the languages

• Switch on the ignition
• Select the "Language” option in the "Settings” menu
• Select "Other languages” from the list
• Now follow the instructions that appear on the monitor.

A "software update” takes place, and the progress of the loading process is displayed on the
monitor.

After completing the loading process the system software CD will be ejected.
After removing the system software CD and confirming by pressing OK, the navigation system
is restarted.

14. Language setting

Retrofit/Installation kit No. 65 90 0 151 635 (others see cover sheet)

Issue date: 06.2002

Installation instructions No. 01 29 0 028 872

EN/18

Summary of Contents for 65 90 0 028 873























Reviews:

No comments

Brands by name

Popular brands

Load more brands