EN/22
Retrofit / Installation kit No. 65 12 0 029 649 (others see cover sheet)
Issue date: 05.2001
Installation Instructions No. 01 29 0 029 574
8.
To install the CD changer (cars with an on-board monitor and without a DSP amplifier only)
Push the shrink hose (3) over branch
E2
, silver 10-pin plug casing on adapter cable
E
, and
connect branch
C1
, silver 10-pin socket casing on control cable B to it.
As you connect
C1
to
E2
ensure that it is correctly positioned, see figure.
All sharp metal and plastic detents are to be removed from plug connection
C1
and
E2
using
an angle cutter.
There must be no sharp edges or corners on plug connection
C1
and
E2
.
Push the shrink hose (3) over the plug connection
C1
and
E2
and shrink it using a hot air blower.
0
0
The installation of the control cable
C
for the
CD changer is
only required
, if the black 6-pin
socket casing
X18729
on the control cable for the
CD changer is not tied back on the on-board
monitor wiring harness.
F 39 0923 B
C
X18729
!
!
!
