BMW 54 13 086 Removing And Installing Download Page 3

Additional information is available. 

General information 

WARNING 

Danger! Life-threatening injuries!

RISK OF DAMAGE 

Damage to or destruction of electrical components.

61 35 ...   Notes on ESD protection (Electro Static Discharge)  

PRELIMINARY WORK 

1–Removing the front panorama glass roof panel

Pyrotechnic components.

• All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel 

only.

• Replace any damaged part or ones that have been dropped.
• For additional information see: 72 00 Safety regulations on handling components with gas generators.

Electrostatic discharge.

• Leave electrical components in original packaging until just before they are installed. Use the original packaging 

only for any return shipments. Always package removed components straight away.

• Read and comply with user information on using the associated special tool 12 7 060.
• Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.
• Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
• For additional information see: 61 35 ... Notes for ESD protection (electrostatic discharge)

• Slightly open the front panoramic glass sunroof-cover 

(

1

)

 as shown.

REP-REP-P-5413086-F44 V - 1

VIN: XXX23ALXXXXXXXXXX 

2/1/2021 3/42

© Copyright BMW Group - Subject to printing errors, mistakes and technical changes. 

Summary of Contents for 54 13 086











































Reviews: