BMW 5 SERIES - CATALOGUE, Owner'S Manual

Page: 177 / 337

Without steering and lane control
assistant: reducing distance
Press button repeatedly until the de‐
sired distance is set.
Instrument cluster will display selected dis‐
tance, refer to page
177 .
Without steering and lane control
assistant: increasing distance
Press button repeatedly until the de‐
sired distance is set.
Instrument cluster will display selected dis‐
tance, refer to page
177 .
With steering and lane control
assistant: adjusting distance
Press button repeatedly until the de‐
sired distance is set.
Continuing cruise control
An interrupted cruise control can be continued
by calling up the stored speed.
Make sure that the difference between current
speed and stored speed is not too large before
calling up the stored speed. Otherwise, unin‐
tentional braking or accelerating may occur.
Press button with the system inter‐
rupted.
Cruise control is continued with the saved val‐
ues.
In the following cases, the stored speed value
is deleted and cannot be called up again:
▷ When the system is switched off.
▷ When drive-ready state is switched off.
Displays in the instrument cluster
Display in the speedometer
▷ Green marking: system is
active, the marking indicates
the desired speed.
▷ Orange/white marking: sys‐
tem is interrupted, the mark‐
ing indicates the stored
speed.
▷ No marking: system is switched off.
Status display
The selected desired speed is hidden
after a brief time.
Distance to vehicle ahead of you
Selected distance to the vehicle ahead of you
is shown.
Symbol Description
Distance 1
Distance 2
Distance 3
Distance 4
This value is set automatically
after the system is switched
on.
Seite 177
Driver assistance systems Controls
177
Online Edition for Part no. 01 40 2 976 346 - X/16