BMW 2009 M5 Owner'S Manual Download Page 109

Page: 109 / 266

107

Sun blinds for rear side windows

Pull the loop of the roller sun blind and hook
onto bracket.

Do not open the window with the roller
sun blind deployed. Otherwise, there is a

risk of damage and injury at higher speeds.

Glove compartment

Opening

Pull the handle. The light in the glove compart-
ment switches on.

To prevent injury in the event of an acci-
dent while the vehicle is being driven,

close the glove compartment immediately after
use.

Closing

Raise the lid into the closed position.

Locking

Lock with a key.

If you only hand over the remote control
without the integrated key, e.g. for valet

parking, refer to page

, the glove compart-

ment cannot be unlocked.

USB interface for data transmission

Port for importing and exporting data on USB
devices, e.g. music collections.
Observe the following when connecting:

Do not use force when plugging the con-
nector into the USB-audio interface.

Do not connect devices such as fans or
lamps to the USB-audio interface.

Do not connect USB hard disks.

Do not use the USB interface to recharge
external devices.

Front center armrest

The compartment in the center armrest is
divided into two sections.

Opening cover

Press the button. The cover opens somewhat
and can be folded upwards.
Depending on vehicle equipment, the upper
section contains a compartment with a mat that
can be removed for cleaning or a telephone cra-
dle

Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG

Summary of Contents for 2009 M5











































































































































































































































































Search results

Summary of Contents for 2009 M5

Reviews:

Related manuals for 2009 M5

Brands by name

Popular brands

BMW 2009 M5, Owner'S Manual

Search results

Summary of Contents for 2009 M5

Reviews:

Related manuals for 2009 M5

Brands by name

Popular brands