BMW 2009 6 Series, Owner'S Manual

Page: 80 / 272

Everything under control
78
For different routes
You can display the average speed and average
consumption for two different routes on the
Control Display, refer to the following and to
Trip computer.
Displays on Control Display
You can also call up the computer via iDrive, for
operating principle refer to page
16 .
1. Press the button.
This opens the start menu.
2. Move the controller to the right to open
"Navigation".
Without navigation system
*
: Open "Car
Data".
3. Select "Car Data" and press the controller.
4. Select "Onboard info" and press the con-
troller.
>
Estimated time of arrival at destination and
remaining distance:
> Entering a distance manually in the com-
puter, see below.
> Entering a destination in the navigation
system
*
, refer to page 136 .
> Cruising range
> Average speed
>
Average fuel consumption
Resetting values
You can reset the values for the average speed
and average fuel consumption:
1. Select the respective menu item and press
the controller.
2. To confirm your selection, press the con-
troller again.
Entering a distance manually
1. Select "Distance to dest." and press the
controller.
2. Turn the controller to select the distance
to your destination.
3. Press the controller to apply the setting.
The distance is automatically preset during the
destination guidance of the navigation sys-
tem
*
.
Trip computer
The trip computer is suitable, for example, for a
vacation trip.
1. Open the start menu.
2. Open "Navigation".
Without navigation system
*
: Open "Car
Data".
3. Select "Car Data" and press the controller.
Online Edition for Part no. 01 41 2 600 759 - © 08/08 BMW AG