BMW 2008 M6 Owner'S Manual Download Page 192

Page: 192 / 262

Telep

oning

190

Insert the snap-in adapter at the front and
press down until it engages.

To remove the snap-in adapter:
Press the area

around the button.

Inserting mobile phone

Remove the protective cap from the mobile
phone's antenna connector if necessary, so
that the mobile phone can engage in the
snap-in adapter.

With the buttons facing upward, press the
mobile phone toward the electrical connec-
tions and press down until it engages.

From radio readiness or with the steering
unlocked the mobile phone's battery is
charged.

To protect the vehicle's batteries, avoid
using the phone when the ignition is

switched off.

Removing mobile phone

Press button.

Online Edition for Part no. 01 41 0 014 244 - © 08/07 BMW AG

Summary of Contents for 2008 M6







































































































































































































































































Search results

Summary of Contents for 2008 M6

Reviews:

Related manuals for 2008 M6

Brands by name

Popular brands

BMW 2008 M6, Owner'S Manual

Search results

Summary of Contents for 2008 M6

Reviews:

Related manuals for 2008 M6

Brands by name

Popular brands