BMW 2008 3 Series, Owner'S Manual

Page: 87 / 272

Co
n
tr
o
ls
85
Re
fe
re
n
c
e
At
a
g
la
n
c
e
D
riv
in
g ti
ps
C
o
m
m
uni
ca
ti
o
n
s
Na
v
iga
ti
on
En
te
rt
a
in
m
e
n
t
M
o
bi
lity
3. Push button 1 to check for other messages.
4. Press button 2 .
The display again shows the outside tem-
perature and the time.
Viewing more information later
iDrive, for operating principle refer to page 16 .
1. Press the button.
This opens the start menu.
2. Press the controller to open the menu.
3. Select "Info sources" and press the control-
ler.
4. Select "Service Info" and press the control-
ler.
5. If necessary, move the highlight marker to
the uppermost field. Turn the controller
until "Check Control messages" is selected
and press the controller.
6. Select a text message and press the con-
troller.
To exit the display:
Select
and press the controller.
Speed limit
You can enter a speed, and a Check Control
message will indicate when you reach this
speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your vehicle speed falls below it
again by at least 3 mph or 5 km/h.
iDrive, for operating principle refer to page
16 .
1. Open the start menu.
2. Call up "Navigation".
3. Select "Car Data" and press the controller.
4. Select "Limit" and press the controller.
Setting or changing the limit
1. Select speed value and press the controller.
2. Turn the controller to set the limit.
3. Press the controller to apply the setting.
Online Edition for Part no. 01 41 0 014 258 - © 08/07 BMW AG