BMW 2006 M6 Owner'S Manual Download Page 70

Page: 70 / 227

ryth

ing un

r co

rol

Turn the controller until "Display settings"
is selected and press the controller.

Setting time

Move the controller once to the front if nec-
essary to change to the first field from the
top.

Turn the controller until "Time" is selected
and press the controller.

Turn the controller until "Set time" is
selected and press the controller.

Making settings

Turn the controller to set the hours and
press the controller.

Turn the controller to set the minutes and
press the controller.

The changed time is stored.

Activating hour signal*

You will hear three tones just before each full
hour.
Select "Hour memo" and press the controller.

The hour signal is activated.

Setting time format

Select "Time format" and press the control-
ler.

Select the desired format and press the
controller.

The setting is stored for the remote control cur-
rently in use.

Setting date

Select "Date" and press the controller.

Online Edition for Part No. 01 41 0 012 118 - © 02/06 BMW AG

Summary of Contents for 2006 M6




































































































































































































































Search results

Summary of Contents for 2006 M6

Reviews:

Related manuals for 2006 M6

Brands by name

Popular brands

BMW 2006 M6, Owner'S Manual

Search results

Summary of Contents for 2006 M6

Reviews:

Related manuals for 2006 M6

Brands by name

Popular brands