BMW 2006 6 Series, Owner'S Manual

Page: 77 / 236

E
ve
ryth
ing un
de
r co
nt
rol
76
tances, refer to Displays on Control Display or
Trip computer.
To reset the average fuel consumption: press
the BC button in the turn signal lever for approx.
2 seconds.
Displays on Control Display
You can also call up the computer via iDrive, for
principle details, refer to page
16 .
1. Press the button.
This opens the start menu.
2. Move the controller to the right to open
"Navigation".
In vehicles without navigation system
*
:
Open "Car Data".
3. Select "Car Data" and press the controller.
4. Select "Onboard info" and press the con-
troller.
> Estimated time of arrival at destination:
> Entering a distance manually in the com-
puter, see below.
> Entering a destination in the navigation
system
*
, refer to page 121 .
>
Remaining range
> Distance to destination:
> Entering a distance manually in the com-
puter, see below.
> Entering a destination in the navigation
system
*
, refer to page 121 .
> Average speed
> Average fuel consumption
Resetting values
You can reset the values for average speed and
average fuel consumption:
1. Select the desired menu item and press the
controller.
2. Press the controller again to confirm.
Entering a distance manually
1. Select "Distance to dest." and press the
controller.
2. Turn the controller to select the distance
to your destination. If necessary, hold it
against a slight resistance to enter a greater
difference.
3. Press the controller to apply the setting.
The distance is automatically predetermined
during the destination guidance of the naviga-
tion system
*
.
Trip computer
The trip computer is suitable for a vacation trip,
for example.
1. Open start menu.
2. Open "Navigation".
In vehicles without navigation system
*
:
Open "Car Data".
3. Select "Car Data" and press the controller.
Online Edition for Part-No. 01 41 0 159 709 © 09/05 BMW AG