BMW 2001 325CI, Manual

Page: 67 / 215

67 n
Index
Data
Technology
Repairs
Car care
Controls
Overview
Rollover protection system
In the event of an accident or some
other critical driving situation (extreme
tilting in the longitudinal or transverse
axis, loss of contact with the ground),
the rollover protection system will be
automatically activated. The protective
bars located in the rear headrests
extend within fractions of a second.
In addition to the integrated rollover bar
in the windshield frame, the rollover
protection system gives all the vehicle
occupants the necessary headroom.
Always keep the travel path clear
for the rollover protection system.
Under no circumstances should you
cover the headrests.
In the event of less serious accidents,
the safety belt will protect you and,
depending on the severity of the acci-
dent, so will the safety belt tensioner
and the multi-stage airbag restraint
system.
c
If, after being automatically triggered,
the protective function is not needed,
then the rollover protection system can
be lowered back into place. No special
tool is needed for this.
1 Using a screwdriver from the on-
board tool kit, remove the cover
panel; to do this, position the screw-
driver under the notch (arrow).
46cde007
2Pull the lever (arrow) toward the front
of the car and hold it in this position.
46cde006