BMW 2 COUPE 2023 Series, Owner'S Manual

Page: 90 / 340

Pressing the switch again
stops the motion.
▷ Briefly press out the switch twice in succes-
sion toward the front past the resistance
point.
The glass sunroof and sun protection close
together.
Pressing the switch again stops the motion.
Comfort position
In some models, the wind noises in the car's
interior are lowest when the glass sunroof is
not fully open. In these models, the automatic
function initially only opens the glass sunroof
up to this comfort position.
Pressing the switch in the vehicle interior again
opens the glass sunroof fully.
Jam protection system
Principle
The jam protection prevents objects or body
parts from becoming jammed between the
roof frame and glass sunroof while the glass
sunroof is closing.
General information
If a resistance or blockage is detected while
the glass sunroof is closing, the closing opera-
tion is interrupted once the roof reaches the
half-open position, or it is stopped when clos-
ing from the tilted position.
Closing from the open position without
jam protection
In case of danger from the outside or if icing
might prevent normal closing, proceed as fol-
lows:
1. Close all doors.
2. Push the switch forward past the resistance
point and hold.
The glass sunroof closes with limited jam
protection. If the closing force exceeds a
specific threshold, closing is interrupted.
3. Push the switch forward again past the re-
sistance point and hold until the glass sun-
roof closes without jam protection. Make
sure that the closing path is clear.
Closing from the lifted position without
jam protection
In case of danger from the outside or if icing
might prevent normal closing, proceed as fol-
lows:
1. Close all doors.
2. Push the switch forward past the resistance
point and hold.
Initializing after a power interruption
General information
After a power interruption during the opening
or closing process, the glass sunroof can only
be operated to a limited extent. Initializing the
system can help in this case.
The system can be initialized under the follow-
ing conditions:
▷ The vehicle is parked in a horizontal posi-
tion.
▷ The vehicle will not be moved until the initi-
alization is completed.
▷ The drive-ready state is established.
▷ The outside temperature is above
41 ℉/5 ℃.
Seite 90
CONTROLS Opening and closing
90
Online Edition for Part no. 01405A5E788 - VI/22