BMW 2 COUPE 2023 Series, Owner'S Manual

Page: 222 / 340

Adjusting the upper body
temperature
General information
The air temperature in the upper body area
can be adjusted.
This does not change the set interior tempera-
ture for the driver and front passenger.
Adjusting the upper body temperature
1. "CLIMATE MENU"
2. "Settings"
3. "Temp. adjustment upper body"
4. Increase or decrease temperature.
Air conditioning
Principle
The air in the interior will be cooled and dehu-
midified and, depending on the temperature
setting, warmed again.
Functional requirement
Standby or drive readiness is switched on.
Switching the cooling function on/off
1. "CLIMATE MENU"
2. "A/C"
3. Select the desired setting.
Depending on the weather, the windshield and
the side windows may fog up briefly when
drive-ready state is switched on.
When using the cooling mode, condensation
that will exit below the vehicle.
Maximum cooling
Principle
The function enables a quick and intense cool-
ing of the interior.
General information
The system is set to the lowest temperature,
maximum air flow and recirculated-air mode.
Rear automatic climate control:
The function is automatically activated in the
rear when the SYNC program is turned on.
Functional requirement
The function is available at an outside temper-
ature above approx. 32 ℉/0 ℃ and with the
drive-ready state switched on.
Turning maximum cooling on/off
1. "CLIMATE MENU"
2. "MAX A/C"
3. Select the desired setting.
Air flows out of the air vents to the upper body
area. Open the vents.
Air recirculation mode
Principle
You may react to unpleasant odors or pollu-
tants in the immediate environment by tempo-
rarily suspending the supply of outside air. The
system then recirculates the interior air.
General information
If there is window condensation, turn off the air
recirculation.
When the air recirculation is turned off, outside
air is directed into the interior.
Seite 222
CONTROLS Climate control
222
Online Edition for Part no. 01405A5E788 - VI/22