BMW 2 COUPE 2023 Series Owner'S Manual Download Page 103

Page: 103 / 340

Malfunction

In case of an electrical malfunction, adjust the

exterior mirror by pressing on the edges of the

mirror glass.

Folding in/folding out the exterior

mirrors

NOTICE

Depending on the vehicle width, the vehicle

can be damaged in car washes. There is a

risk of damage to property, among other po-

tential damage. Before washing, fold in the

mirrors by hand or with the button.

Press the button.

Folding is possible up to a speed of approx.

15 mph/20 km/h.
Folding the exterior mirrors in and out is help-

ful in the following situations:

▷

In car washes.

▷

On narrow roads.

Exterior mirrors that were folded in are folded

out automatically at a speed of approx.

25 mph/40 km/h.

Automatic heating

Both exterior mirrors are automatically heated

as needed and when the drive-ready state is

switched on.

Automatic dimming

The exterior mirror on the driver's side is au-

tomatically dimmed. Photocells in the interior

mirror are used to control this.

Automatic Curb Monitor

Principle

If reverse gear is engaged, the mirror glass on

the passenger's side is tilted downward. This

improves your view of the curb and other low-

lying obstacles when parking, for instance.

Activating the Automatic Curb Monitor

slide the switch to the driver's side

mirror position.

Engage selector lever position R.

Deactivating the Automatic Curb

Monitor

Slide the switch to the front passenger's side

exterior mirror position.

Interior mirror, manually

dimmable

To reduce the blinding glare of the interior mir-

ror, flip the lever forward.

Interior mirror, automatic

dimming feature

General information

The interior mirror is dimmed automatically.
Photocells are used for control:

Seite 103

Seats, mirrors and steering wheel

CONTROLS

103

Online Edition for Part no. 01405A5E788 - VI/22

Summary of Contents for 2 COUPE 2023 Series





















































































































































































































































































































































Search results

Summary of Contents for 2 COUPE 2023 Series

Reviews:

Related manuals for 2 COUPE 2023 Series

Brands by name

Popular brands

BMW 2 COUPE 2023 Series, Owner'S Manual

Search results

Summary of Contents for 2 COUPE 2023 Series

Reviews:

Related manuals for 2 COUPE 2023 Series

Brands by name

Popular brands