BMW Motorrad S 1000 R 2020, Rider'S Manual

Page: 81 / 286

75
can be set by an authorized
BMW Motorrad retailer.
with Keyless Ride
OE
A triggered alarm signal can be
canceled at any time by press-
ing the button 1 of the radio-
operated key without deactivat-
ing the DWA.
If an alarm signal has been
triggered while the motorcycle
was unattended, the rider is
notified accordingly by an
alarm tone sounding once
when the ignition is switched
on. The DWA LED then
indicates the reason for the
alarm signal for one minute.
Light signals on indicator
light:
1 flash: Motion sensor 1
2 flashes: Motion sensor 2
3 flashes: Ignition switched
on with unauthorized ignition
key
4 flashes: DWA disconnected
from motorcycle battery
5 flashes: Motion sensor 3
Deactivating DWA
Switch on the ignition.
Turn indicators are illuminated
once.
Confirmation tone sounds
once (if programmed).
DWA is now switched off.
Adjust DWA
Switching on the ignition
( 54).
Call up menu
Settings
,
Ve-
hicle settings
,
Alarm
system
.
The following adjustments are
available:
Adjust
Warning signal
Turn
Tilt sensor
on and
off
Turn
Arming tone
on and
off
Turn
Arm automatically
on and off
Adjustment options
Warning signal
: Set rising
and falling or intermittent alarm
tone.
Tilt sensor
: Activate the tilt
alarm sensor to monitor the tilt
of the vehicle. The anti-theft
alarm system responds if, for
example, if the wheel is stolen
or the motorcycle is towed.